El siguiente ejemplo muestra el comando que muestra la configuración del router y sus vecinos.
BGP neighbor is 192.168.1.2, remote AS 100, internal link
BGP version 4, remote router ID 192.168.1.2
BGP state = Established, up for 03:33:14
Last read 00:00:13, hold time is 180, keepalive interval is 60 seconds
Neighbor capabilities:
Route refresh: advertised and received(new)
Address family IPv4 Unicast: advertised and received
Received 271 messages, 0 notifications, 0 in queue
Sent 265 messages, 0 notifications, 0 in queue
Route refresh request: received 0, sent 0
Default minimum time between advertisement runs is 5 seconds
For address family: IPv4 Unicast
BGP table version 3, neighbor version 3
Index 2, Offset 0, Mask 0x4
Route-Reflector Client
1 accepted prefixes consume 36 bytes
Prefix advertised 6, suppressed 0, withdrawn 0
Number of NLRIs in the update sent: max 1, min 0
Connections established 6; dropped 5
Last reset 03:33:42, due to User reset
Connection state is ESTAB, I/O status: 1, unread input bytes: 0
Local host: 192.168.1.1, Local port: 11010
Foreign host: 192.168.1.2, Foreign port: 179
Enqueued packets for retransmit: 0, input: 0 mis-ordered: 0 (0 bytes)
Event Timers (current time is 0xED5B3C):
Timer Starts Wakeups Next
Retrans 218 0 0x0
TimeWait 0 0 0x0
AckHold 216 113 0x0
SendWnd 0 0 0x0
KeepAlive 0 0 0x0
GiveUp 0 0 0x0
PmtuAger 0 0 0x0
DeadWait 0 0 0x0
iss: 326559462 snduna: 326563662 sndnxt: 326563662 sndwnd: 15111
irs: 4213153520 rcvnxt: 4213157725 rcvwnd: 15111 delrcvwnd: 1273
SRTT: 300 ms, RTTO: 303 ms, RTV: 3 ms, KRTT: 0 ms
minRTT: 8 ms, maxRTT: 300 ms, ACK hold: 200 ms
Flags: higher precedence, nagle
Datagrams (max data segment is 1460 bytes):
Rcvd: 323 (out of order: 0), with data: 216, total data bytes: 4204
Sent: 334 (retransmit: 0, fastretransmit: 0), with data: 217, total data bytes:9